Page 1 of 2

Pro for Motha

Posted: Wed Apr 06, 2005 6:24 pm
by enoch308
I would like to climb Motha at Roadside and try out some Tricams.
Can you tell me what sizes I might want -- or are the #1 - #2 camalots
really better?

Posted: Wed Apr 06, 2005 6:27 pm
by JB
I use a #3 camalot, a #2 camalot and a #1 camalot. That's about it.

I did this flake up at long wall (Too little too late) that I used the same cams... 3,2,1.

I wanted to call it "3,2,1 Contact". damn that was a cool show.

Posted: Wed Apr 06, 2005 6:32 pm
by Wes
I think you can do it with all kinds of gear. Last time I did it, I think I used a brown tri-cam, .75 and 1 camalot.

Wes

Posted: Wed Apr 06, 2005 6:36 pm
by KD
i use a couple pink tri cams, a red, and gold and red camalots too if memory serves. nice climb - top it out for a cool ledge view; nice sunset route - enjoy.

Posted: Wed Apr 06, 2005 6:38 pm
by Huggybone
I think I remember a .75 being important.

Posted: Wed Apr 06, 2005 6:54 pm
by dhoyne
I used a few of the smaller Metolius 3 cams; yellow, red, and orange. As far as tri-cams, .5 - 2 probably.

Posted: Wed Apr 06, 2005 7:33 pm
by chriss
I lead it the other day and used a 1 and 2 #2 camalots. But it seemed like alot more options were available as well.

Posted: Wed Apr 06, 2005 9:14 pm
by Sunshine
You can sew it up with passive pro. If you are an expert.

Posted: Wed Apr 06, 2005 9:39 pm
by Ascentionist
#.75, #1( or #2), #2 and #3 TCU after the big ledge near the top and to the left.

Posted: Wed Apr 06, 2005 9:41 pm
by Gaar
I free'd it once its a 5.7!

The other time i used one #3 camolot and a .75!

Jusst make sure you place them with the wider lobes down