Page 1 of 1
Camp tri cam recall
Posted: Sat Jan 17, 2004 12:57 am
by Jeff
In the latest R&I.
The brown 1.5.
Lot #2G etched in the side.
Look for a crack near the pin housing that connects the sling to the cam.
If you have one of these, contact Camp. They will tell you what to do.
Mine don't have any numbers or letters etched into them .
Oh well, I never place that one anyway.
Posted: Sat Jan 17, 2004 2:22 pm
by Lucinda
Thanks Jeff. I bought three this summer and one is the brown. They all have a real faint 2G on the sides. Another season of use and this probably would have been totally scratched off.
Posted: Sat Jan 17, 2004 2:39 pm
by ynot
Someone posted about that problem a while back.A regular inspection of all of them would be prudent. I didnt know about the 2g. Is it just printed? Mine are 3 years old and well used.
Posted: Sat Jan 17, 2004 3:00 pm
by Jeff
My R&I is in the van at work but the artical is in the back with the classifieds in red print.
It says "2G is etched" on the side.
Posted: Sat Jan 17, 2004 4:08 pm
by Lucinda
CAMP contact can be made via phone: 39 034890117 (don't know if you need to speak Italian) or e-mail:
contact@camp.it I'll let you know how they respond.
Posted: Sat Jan 17, 2004 4:10 pm
by Lucinda
correction on the phone number: 39 0341890117
Posted: Sat Jan 17, 2004 4:26 pm
by Jeff
Good find on a contact Lucinda.
I looked around on the web and couldn't find anything.
I don't think my phone will dial a number like that though
.
Posted: Mon Jan 19, 2004 11:53 pm
by funny monkey
Dial 011 and then the number (39 etc...)
Posted: Mon Jan 19, 2004 11:56 pm
by ynot
Is the brown one the next one bigger than the blue?
Posted: Tue Jan 20, 2004 12:40 am
by Lucinda
its the one with the brown sling, chuffer
, or next size up from the red, I think blue is after.
this pretty much tells it all
http://www.camp-usa.com/tricamnotice.aspx