The new Motherlode rebolting and help thread

Access, Rehab Projects, Derbyfests and more...
Andrew
Posts: 3809
Joined: Mon Oct 07, 2002 9:40 pm

The new Motherlode rebolting and help thread

Post by Andrew »

Since the last thread turned into ten pages of drivel, I decided to make a new thread dedicated to what has been done and what we still need help with.

So far the following routes are completely done (all new glue-ins, anchors finished, and old bolts removed): Tuna Town, Resurrection, The Verdict, Rocket Dog, Kick Me In The Jimmy, Low Easy One, and Burliers Bane, Chainsaw, Convicted, ale-8 one, skinboat.

Things that need to be done next: Hoofmaker and snapper need old bolts pulled, and harvest needs glued... stella only needs the old anchors removed( must bring crescent or open ended wrench), more routes need drilling.

All routes need old bolt holes filled, but that is note imperative. Best method is to fill them with plumbers putty, unless you know of something better.

If anyone wants to volunteer to help do any of these things, shoot me a PM and I can tell you where to get the tools and gear. Removing old bolts and swapping anchors is an easy job that anyone can do.

A big thanks so far to Dustin, Mike Wheatley, Dave Linz, Alex Southward, Sean (the one with tattoos and sexy muscles), Matt, and Roger for all there work especially in 90+ degree weather with 100+ heat indexes.

I will try to keep this first post properly updated, and please keep this thread on topic.
Last edited by Andrew on Fri Sep 30, 2011 10:49 am, edited 5 times in total.
Living the dream
whoneedsfeet
Posts: 346
Joined: Wed Jun 08, 2011 8:40 pm

Re: The new Motherlode rebolting and help thread

Post by whoneedsfeet »

hey I'll help....the only reason I'm posting this is because you're looking over my shoulder making sure I don't derail this thread.
Skipping cruxes is a way of life.
Andrew
Posts: 3809
Joined: Mon Oct 07, 2002 9:40 pm

Re: The new Motherlode rebolting and help thread

Post by Andrew »

I know you will help
Living the dream
Andrew
Posts: 3809
Joined: Mon Oct 07, 2002 9:40 pm

Re: The new Motherlode rebolting and help thread

Post by Andrew »

I am going down tomorrow with Dave, and we will be working at the lode the second half of the day. If anyone wants to join us show up at the lode around 2:00 or 3:00 or car pool with us from cinci or lex or miguels. We plan on climbing at the gold coast in the morning before the sun hits the wall.
Living the dream
dustonian
Posts: 3089
Joined: Mon Jul 27, 2009 2:46 pm

Re: The new Motherlode rebolting and help thread

Post by dustonian »

Do you need more glue etc? Let me know. I am THIS CLOSE to being free again for a couple weeks!!
Andrew
Posts: 3809
Joined: Mon Oct 07, 2002 9:40 pm

Re: The new Motherlode rebolting and help thread

Post by Andrew »

dustonian wrote:Do you need more glue etc? Let me know. I am THIS CLOSE to being free again for a couple weeks!!
not yet
Living the dream
Andrew
Posts: 3809
Joined: Mon Oct 07, 2002 9:40 pm

Re: The new Motherlode rebolting and help thread

Post by Andrew »

First post updated, Sean pulled the old bolts on burliers and the Low Easy One. Thanks.
Living the dream
the lurkist
Posts: 2240
Joined: Wed Nov 13, 2002 2:07 pm

Re: The new Motherlode rebolting and help thread

Post by the lurkist »

I will try to get out this weekend. My free time this summer has dried up a bit. Studying for boards,too. Seven years of school and I don't want to fuck it up now with cragging. (fucked up priorities, I know).
I have fifty bolts when some one needs them. I will try to get out Sat or Sun. Andrew, whats your day this weekend?
"It really is all good ! My thinking only occasionally calls it differently..."
Normie
Andrew
Posts: 3809
Joined: Mon Oct 07, 2002 9:40 pm

Re: The new Motherlode rebolting and help thread

Post by Andrew »

My day this weekend is today, Friday. If you don't mind gluing, we can give you a lot to glue.
Living the dream
Post Reply