trad rack

Placing a cam? Slotting a nut? Slinging a tree?
dspringer
Posts: 1
Joined: Wed May 05, 2010 5:13 pm

trad rack

Post by dspringer »

I'm looking to start trad climbing. What do I need to buy for a trad rack for the red?
User avatar
rjackson
Posts: 928
Joined: Fri Jun 20, 2003 3:26 pm

Post by rjackson »

I'd recommend hooking up with someone that already has a rack, and some experience, and go out with them a few times and see if you really want to invest in trad climbing in the red. It's a different kind of animal. If you follow this advice then the next step would be to check out various different manufactures and the differences between items that function the same between them (cams, nuts, slings, biners, etc). If you get this far, then you won't need to ask anyone what you'll need, you'll know...
Pick myself up, stop lookin' back.
Grand Funk Railroad
jrathfon
Posts: 137
Joined: Sat Sep 05, 2009 2:39 pm

Post by jrathfon »

good advice above, but to answer the question directly, my typical red onsite rack is: double BD c4's from 0.5-2, green yellow aliens, single 0.4 and 3 c4's, 1.5 sets of nuts from 4-10 BD and equivalent of 3-7 BD sized offset brassies, 4 quickdraws and 4 trad slings.

that will shift as i eye something up, for instance thinner climbs i'll tack on 0.3-0.5's c4's, blue alien, green red c3's, etc. for hand sized climbs (africa, etc) i'll lose the finger tip sizes and tripple up on #1-2 c4's (red/yellow), for more moderate stuff having double #3's and a #4 is pretty standard as the moderates tend to always get a bit bigger. tricams have nitch placements everyonce in a while.

to sum it up, a set of nuts, and double cams from tips to wide fists would be the standard rack.

to fully protect everything well in the red, you'd want to merge two of those racks. cause a lot of climbs will take numerous cams in the same size range: roadside attraction, africa, adromeda strain, crack attack, oberon, rebar, where lizard's dare, to name a few.
User avatar
pigsteak
Posts: 9684
Joined: Tue Jun 17, 2003 6:49 pm

Post by pigsteak »

I own maybe fifteen cams from different manufacturers and have had zero problem getting up any climb at the Red.... too much gear is just a nerd thing to do....
Positive vibes brah...positive vibes.
User avatar
ynp1
Posts: 1324
Joined: Thu Sep 16, 2004 10:54 pm

Post by ynp1 »

1-4 BD angles, 1-4 KBs, 1-4 LA's, 1-3 BD beaks x2, 1 bong, 2 RURPs, and a hammer should do the trick...

Drive it to the eye!!!
I don't have haters, I have fans in denial.
dustonian
Posts: 3089
Joined: Mon Jul 27, 2009 2:46 pm

Post by dustonian »

wanna sell any of those Kipp??
the lurkist
Posts: 2240
Joined: Wed Nov 13, 2002 2:07 pm

Post by the lurkist »

How many gear sales have there been after guys who go out and buy a nice rack without realizing how scared they are about to make themselves go trad climbing for the first time?
I personally have benefited from a few.
"It really is all good ! My thinking only occasionally calls it differently..."
Normie
bentley
Posts: 275
Joined: Fri Dec 09, 2005 5:34 pm

Post by bentley »

Dont forget a stickclip!
Climbing is not free. Support your local climbing organization. Labor and money precious resources!
toad857
Posts: 1691
Joined: Thu Dec 13, 2007 4:31 pm

Post by toad857 »

and an attitude... im pretty sure that most trad racks require some kind of attitude to make them complete
jrathfon
Posts: 137
Joined: Sat Sep 05, 2009 2:39 pm

Post by jrathfon »

pigsteak wrote:I own maybe fifteen cams from different manufacturers and have had zero problem getting up any climb at the Red.... too much gear is just a nerd thing to do....
hence a double rack from 0.3 to 3 and a #4... and if it's nerdy being safe, i prefer to be nerdy. have fun on andromeda strain with 3-4 pieces.
Post Reply