Posted: Sun Jan 11, 2009 5:22 am
seriosuly, that was a steal.
RRC Archives
The old Redriverclimbing.com Forums
https://rrcarchives.com/forums/
HURRY!!! $60 ROPE!!! BEFORE THEY'RE GONE!!!!
Page 3 of 5
Posted: Mon Jan 12, 2009 1:36 am
7PM Sunday, and they're still all gone. dAym.. That was a steal.
Posted: Mon Jan 12, 2009 1:53 am
Yeah Chuck.... I thought for sure, after reospeed said they were gone on Saturday, that they would be magically back in stock on Sunday. Thanks for the heads up. 
Posted: Wed Jan 14, 2009 4:16 am
I'm pissed I didn't get one. Why was the rope so cheap?
Posted: Wed Jan 14, 2009 10:29 pm
uhh, maybe defective? No, seriously I'm guessing a color mistake, thus a 'blem in their stock. Or just overstock of a rope that just didn't sell. Or a great holiday spirit to help out poor dirtbag climbers in need of a cheap rope. Take your pick.
Posted: Thu Jan 15, 2009 1:38 am
because PMI makes a crappy ropeFujManiac wrote:I'm pissed I didn't get one. Why was the rope so cheap?
Posted: Thu Jan 15, 2009 7:32 pm
Correction, PMI makes a crappy rock climbing rope. As far as their static ropes, PMI Pit rope is the best rope you can get for vertical caving, and it is practically the standard in the caving world. This is because PMI Pit ropes have a nylon sheath, and pit caves have lots of sharp edges. You still need to use rope pads, but if the rope slips off of the pad, you are a whole lot safer than without a nylon sheath. My brother went on a trip and his PMI Pit rope ended up slipping off of the rope pad on to a sharp edge, and there was just a tiny bit of minimal wear done to the sheath.longlegsrule wrote:because PMI makes a crappy ropeFujManiac wrote:I'm pissed I didn't get one. Why was the rope so cheap?
Posted: Thu Jan 15, 2009 8:54 pm
Wasn't PMI formerly owned by Petzl or vice versa?
Posted: Fri Jan 16, 2009 12:17 am
She is on her way to pick you up on her "hot" streetbike....Andrew wrote:I called, use the number on the tech difficulties page. The lady on the phone was very nice and sounded hot.
http://www.atlbikenight.com/files/fat_c ... rcycle.jpg
Posted: Tue Jan 20, 2009 4:13 am
why did i not read the link first???