alien failure
there are a few numbers post in a new thread on rc.com by "mgear_pres" called "alien testing.." something. they give a few numbers.. but i'm a little skeptical about how true it is. i just emailed mgear.com to see if it's real or not. i'll let you know what i hear back. (by the way, there's nothing about it on mgear's site except for the fact aliens aren't for sale.. but they're backordered usually anyway so that's not too unusual)
and great loves will one day have to part -smashing pumpkins
Actually, if you go to http://www.mountaingear.com/aliens/ you'll find the post that says the same thing as the post from mgear_pres. I can't figure out how to get there without typing the address in, but it's definitely there on their website.
As a bunch of people said in the rockclimbing.com thread, I'm going to reserve judgement on this issue until all the data becomes available. That said, I'm also not going to use my Aliens until more data becomes available. Hopefully they can narrow it down to specific lots / batches of cams with the issue.
As a bunch of people said in the rockclimbing.com thread, I'm going to reserve judgement on this issue until all the data becomes available. That said, I'm also not going to use my Aliens until more data becomes available. Hopefully they can narrow it down to specific lots / batches of cams with the issue.
sweet, thanksknooper wrote:Actually, if you go to http://www.mountaingear.com/aliens/ you'll find the post that says the same thing as the post from mgear_pres. I can't figure out how to get there without typing the address in, but it's definitely there on their website.
and great loves will one day have to part -smashing pumpkins
-
- Posts: 1764
- Joined: Fri May 30, 2003 5:07 pm
New news:
http://www.rockclimbing.com/topic/104853
Basically a reacal on aliens produced after Nov '04 and are "marked with a small center punch dimple at the base of the round ball where the axle goes through the cable eye."
What ever that means.
http://www.rockclimbing.com/topic/104853
Basically a reacal on aliens produced after Nov '04 and are "marked with a small center punch dimple at the base of the round ball where the axle goes through the cable eye."
What ever that means.
Screw you guys. I'm going bowling.
a photo should be posted on CCH's website
www.aliencamsbycch.com
It is scary, but recalls happen all the time. I don't know why people are freaking out so much now. Maybe it is because CCH is so small and everyone raves about their gear. There is at least one recall on a climbing product every year, mostly with biners. I've whipped on my alien cams and will continue to use them. It is unfortunate though, and I do recommend checking your cams if you have any.
www.aliencamsbycch.com
It is scary, but recalls happen all the time. I don't know why people are freaking out so much now. Maybe it is because CCH is so small and everyone raves about their gear. There is at least one recall on a climbing product every year, mostly with biners. I've whipped on my alien cams and will continue to use them. It is unfortunate though, and I do recommend checking your cams if you have any.
It's good that they are going to replace all the cams, but any thoughts on how long it's going to take? I didn't see anywhere any estimates on how many cams they expect to replace, and based on the seemingly always sold-out condition of Aliens, I'm thinking that I won't get any defective cams back for several months.
Also, I think everyone is freaking out about this because of CCH's initial response, the popularity of Aliens, and the fact that they cost so much. Biners, nuts, etc are fairly cheap and easy to replace, but not so much with cams. I personally feel a lot better now that the recall is going to happen, and like you, haas, I'm going to keep using my non-recalled Aliens since I like them so much.
Also, I think everyone is freaking out about this because of CCH's initial response, the popularity of Aliens, and the fact that they cost so much. Biners, nuts, etc are fairly cheap and easy to replace, but not so much with cams. I personally feel a lot better now that the recall is going to happen, and like you, haas, I'm going to keep using my non-recalled Aliens since I like them so much.