Page 2 of 4
Re: Drill question
Posted: Wed Jul 11, 2012 1:09 pm
by rjackson
What pig said...
Re: Drill question
Posted: Wed Jul 11, 2012 1:36 pm
by dustonian
if you have to ask...
Re: Drill question
Posted: Wed Jul 11, 2012 1:50 pm
by clif
i have to ask, if you don't know is it better to ask or just muddle through until you figure it out? and or those of you who didn't/don't have to ask, did you muddle through, did someone take the time to show you, or was it divine inspiration from reading pigsteak's send list?
Re: Drill question
Posted: Wed Jul 11, 2012 1:55 pm
by dustonian
OK, to clarify: if you have to ask on the intardnet. I learned from hand-drilling anchors on trad climbs, and watching & helping someone with lots of bolting experience, like anyone considering putting up routes should.
Re: Drill question
Posted: Wed Jul 11, 2012 2:08 pm
by climb2core
Perhaps a better question to ask:
I am looking to do some bolting in the Red. I really don't have any experience or even the equipment. So, before I put something in the rock that may fail and kill myself or someone else I wanted to learn how to go about it safely. Is anyone (with experience bolting in the Red's sandstone) willing to take a look at the rock I wanted to bolt and offer some guidance on the equipment how I should go about doing this?
Disclaimer: The OP didn't say anything about bolting or climbing... just drilling holes in the rock. So, if dude just wants to make a pencil holder out of his rock, my apologies.
Re: Drill question
Posted: Wed Jul 11, 2012 4:28 pm
by falling!!!!
This is a bit more what you might want in a gas powerd drill.
http://www.ezebreak.com/accessories.htm
Not many folks use them here in the US. Ryobi and Makita make one also, but I'm not sure if they are available in the US.
Re: Drill question
Posted: Wed Jul 11, 2012 5:09 pm
by captain static
You've got to be kidding on the gas powered drill? This has me drooling though:
http://www.toolnut.com/Bosch_11536C_1_3 ... 536c-1.htm
Re: Drill question
Posted: Wed Jul 11, 2012 5:28 pm
by dustonian
It's a nice light drill but fairly overrated... the Joey Kinder thing kills me too, almost makes me want to switch models considering how many bolts that guy has screwed up and spray he's slathered upon the world! Anyway I've had mine since January, probably drilled 300 or so holes, and the batteries are already wearing down on them. The SDS mechanism is also somewhat chintzy and mine is already hard to get bits in and out. That said, the charger mechanism is nice tho and it's cool knowing approximately how much juice you have left on a battery. Also, I dropped mine from 70 feet a few weeks ago and it still works great! I wouldn't spend over $425 on one either unless shipping is free... check CPO Bosch or Tyler Tool as well. Give it a generous B+ grade overall.
Re: Drill question
Posted: Wed Jul 11, 2012 5:36 pm
by bcombs
I don't have the compact, but I got my drill at CPO Bosch as well. I think it was right at $300.
Re: Drill question
Posted: Wed Jul 11, 2012 6:08 pm
by falling!!!!
I have noticed that the Bosch chucks are sensitive to proper maintaince.
If you do not lube them as specified the bit will not want to release or insert as it should.