whatever happened to onsight climbing???

Discussions full of RAGE!
rhunt
Posts: 3202
Joined: Thu May 29, 2003 12:02 pm

Post by rhunt »

Alan Evil wrote:So... you mean you don't brush holds either?
I do all the time, ask my belayers. But not because I want the rock face to look pretty. Remember I think the rock face looks better and or has it own unique beauty when it is all chalked up. I bush so the holds will have a better texture.
"Climbing is the spice, not the meal." ~ Lurkist
rhunt
Posts: 3202
Joined: Thu May 29, 2003 12:02 pm

Post by rhunt »

Paul3eb wrote:while they may function the same for you, they differ visually and that's the topic of discussion.
It's all a matter of perspective. I see tick marks and chalked holds as the same thing. So Paul, you and I just do not agree.
"Climbing is the spice, not the meal." ~ Lurkist
rhunt
Posts: 3202
Joined: Thu May 29, 2003 12:02 pm

Post by rhunt »

J-Rock wrote:Larry Day and the many of the other "old school" climbers didn't need tick marks.
They also didn't need 60 meter ropes under 11 mm in diameter and "stealth" rubber.

Things and times change...
"Climbing is the spice, not the meal." ~ Lurkist
specialed
Posts: 14
Joined: Mon Oct 13, 2003 5:04 pm

Post by specialed »

blah blah blah
superfly
Wes
Posts: 6530
Joined: Thu Sep 19, 2002 3:46 pm

Post by Wes »

rhunt wrote:
J-Rock wrote:Larry Day and the many of the other "old school" climbers didn't need tick marks.
They also didn't need 60 meter ropes under 11 mm in diameter and "stealth" rubber.

Things and times change...
Or roterary hammer drills, 5 piece bolts, and crash pads. You ready to give up those things?
J-Rock
Posts: 1936
Joined: Tue Apr 13, 2004 9:30 pm

Post by J-Rock »

I was talking about tick marks, NOT chalk, ropes, rubber, drills, bolts, and crash pads. There is an obvious difference.
"Those iron spikes you use have shortened the life expectancy of the Totem Pole by 50,000 years."

--A Navaho elder
Wes
Posts: 6530
Joined: Thu Sep 19, 2002 3:46 pm

Post by Wes »

J-Rock wrote:I was talking about tick marks, NOT chalk, ropes, rubber, drills, bolts, and crash pads. There is an obvious difference.
Is there? Which cause more impact?

Tell you what: I will give up tick marks if you start hand drilling everything... :wink:
squeezindlemmon
Posts: 1452
Joined: Mon Apr 12, 2004 7:02 pm

Post by squeezindlemmon »

Oh no, Wes - don't open up a different can of worms!

Enlighten me what the big difference is between motorized drilling and hand drilling as far as impact. And don't say noise pollution bec then we will also have to ban atv's and loud sport climbers! :wink:
Emancipate yourself from mental slavery. None but ourselves can free our mind. ~Bob Marley
J-Rock
Posts: 1936
Joined: Tue Apr 13, 2004 9:30 pm

Post by J-Rock »

I don't mind tick marks (I tick mark sometimes myself), but I think people should be reasonable about it and not get carried away with excessive tick marking. Also, it would be nice if more people had the courteousy to brush them off.
"Those iron spikes you use have shortened the life expectancy of the Totem Pole by 50,000 years."

--A Navaho elder
Wes
Posts: 6530
Joined: Thu Sep 19, 2002 3:46 pm

Post by Wes »

J-Rock wrote:I don't mind tick marks (I tick mark sometimes myself), but I think people should be reasonable about it and not get carried away with excessive tick marking. Also, it would be nice if more people had the courteousy to brush them off.
Amen.
Post Reply