Dynamic rope severed

Access, Rehab Projects, Derbyfests and more...
User avatar
clif
Posts: 1731
Joined: Thu Dec 25, 2008 9:24 pm

Dynamic rope severed

Post by clif »

I'm finding it difficult to imagine a climbing rope being cut through by a grooved/sharpened edged carabiner. I do not find Rick's analysis suspect.
Was it a clean cut across the rope? How is it that (assuming) the rope impinged across the sharpened edge instead of the load bearing long axis?
Maybe I'm assuming too much in thinking that it is the degraded carabiner that is the weak link in the system. Was the sheath of the rope in an advanced stage of wear?

Just thinking out loud..
training is for people who care, i have a job.
mike_a_lafontaine
Posts: 234
Joined: Sun Nov 22, 2009 8:44 pm

Re: Dynamic rope severed

Post by mike_a_lafontaine »

I was thinking along the same line when I read that report. I don't doubt it, especially knowing Rick and the attention to detail he pays to EVERYTHING. But in looking at my rope inventory, I have a new 10mm rope that I just don't see getting cut through on a lead fall even on sharpish edges. But my old 9.6 that has been stretched a lot (mostly because my fat ass has been climbing on it)...it has lost a lot of elasticity, and I definately could see it going. So I would also like to know the condition of the rope. Either way, even if you have a more robust, new rope, falling on a sharp edge like that probably does more damage than falling on a smooth, rounded edge, so looking for wear on gear can only be a good thing.
weber
Posts: 1017
Joined: Wed Sep 24, 2003 5:44 pm

Re: Dynamic rope severed

Post by weber »

As I wrote, my research is continuing. Although I didn't witness the incident, we have the word of several climbers that the rope was severed completely with a loud pop when the climber fell. I do have the draw, but we have not been able to get a look at the rope. If anyone knows John Gold (works at Miguels) please encourage him to contact us and let us look at his rope, which was the one that was severed. We have been trying to no avail to talk to him. We were told by the climber who fell that this rope was relatively new with only a few climbs on it.

Until all the facts are on the table, we cannot be 100% certain what actually happened. But, to the best of our knowledge, the probability is high that this event did take place as described. And so the responsible action is to post an alert. There are still draws up on Tape Worm and other climbs in Muir that are significantly worn.
We cannot change the cards we are dealt, just how we play the hand. - Randy Pausch
None are so old as those who have outlived enthusiasm. - Henry David Thoreau
rockman
Posts: 407
Joined: Tue Feb 24, 2004 4:00 am

Re: Dynamic rope severed

Post by rockman »

that biner looks way better than a few than TeamSuck has replaced. No doubt that it is possible for a full cut.
http://teamsuckclimbing.com/photos.php to see a few more
"My Shit is Fucked Up." --Warren Zevon and Terry Kindred.
weber
Posts: 1017
Joined: Wed Sep 24, 2003 5:44 pm

Re: Dynamic rope severed

Post by weber »

It's also interesting to note on the illustration of the cross section that the biner has worn to a point where the angle of the knife edge is at its most acute. Any less wear or any more wear, and this angle becomes more obtuse. This is due, of course, to this particular biner's cross sectional "I" shape. Wearing a biner with a round cross section would probably not have created such a sharp knife edge.

I noticed that although the illustration and photo show up on my posting under "Announcements", they do not appear on the home page posting. If anyone hasn't seen them and wishes to, open the post on the Announcement forum.
We cannot change the cards we are dealt, just how we play the hand. - Randy Pausch
None are so old as those who have outlived enthusiasm. - Henry David Thoreau
the lurkist
Posts: 2240
Joined: Wed Nov 13, 2002 2:07 pm

Re: Dynamic rope severed

Post by the lurkist »

Terrifying. How many biners worn similarly exist in the Red (and any other climbing area one could name.)
I assume Rick is trying the replicate this with the biner in question.
Is anyone aware of similar rope slicing episodes occurring?
Nice work on analysis of the accident and I am glad the guy is okay.
"It really is all good ! My thinking only occasionally calls it differently..."
Normie
User avatar
krampus
Posts: 3933
Joined: Tue Dec 26, 2006 9:31 am

Re: Dynamic rope severed

Post by krampus »

Last year a friend was on 8-ball and fell going to the second bolt. We heard an odd noise and had him check his rope before getting back on. Sure enough, there was a huge gash partly through the core and a bit of a tear up the sheath. I don't remember how hard the fall was but it was a new rope and I could imagine a full slice if the fall was unknowingly repeated or at just the right angle/force. I replaced it and think I still have the old biner somewhere, I could pass it along to compare to the one from tapeworm.
How you compare may not be as important as to whom you are compared
DHB
Posts: 170
Joined: Mon Jun 23, 2008 1:55 pm

Re: Dynamic rope severed

Post by DHB »

I know these steel caribiners that everyone is equipping with are durable, but nothing lasts forever, right? what kind of use are we talking about before they start showing similar wear? And it looks like many steel biners are basically made from bent rod stock, so I assume the more round design (vs the "I" shape of many aluminum biners) will prevent the creation of (dangerously) sharp edges, right?
Last edited by DHB on Thu Sep 09, 2010 3:56 am, edited 1 time in total.
dustonian
Posts: 3089
Joined: Mon Jul 27, 2009 2:46 pm

Re: Dynamic rope severed

Post by dustonian »

Ropes are damaged relatively frequently from sharp edges. On El Cap there have been around a dozen reports of deaths due to ropes cutting over sharp edges (thus the duct tape on the sharpest edges on popular routes), and the biner in question from Tapeworm was MUCH sharper than granite could ever be, not to mention it's metal and not granite. From talking to people at different crags, I have heard of numerous anecdotal reports of sheaths completely severing from sharp-edged grooves on fixed biners, though this is the only case I have personally heard of a rope completely failing by this cause, in the Red at least anyway (there are reports of this from AINAM in previous years).

It is not difficult to imagine this happening. Try it yourself--hang a 9.2-10mm rope under 250 lbs of load (still much lower than a leader fall), and you can easily cut it with a few passes with a butter knife, even plastic. In the last week I have replaced 3 carabiners at Drive By and 2 from Big Money Grip (one at the crux no less) there were at least as a sharp as an average butter knife. The problem is especially bad on first bolts and anchors due to the decreased fleet angles incurred in lowering with sandy ropes (though an anchor should never see the loads seen in a leader fall), though unfortunately in inspecting a few routes last weekend it is by no means limited to first bolts and anchors.

Rick's point is well-taken and hugely important: CHECK FIXED GEAR BEFORE YOU TRUST IT IMPLICITLY. IF A BINER IS GROOVED AND (MOST OF ALL) SHARP--TAKE IT OFF THE ROUTE AND REPLACE IT WITH A NEW ONE!!
User avatar
DriskellHR
Posts: 1260
Joined: Thu Dec 20, 2007 11:34 pm

Re: Dynamic rope severed

Post by DriskellHR »

About 10 yrs ago while clmbing at torrent I witnessed a kid fall on one of the 10's and he rope was severed by the draw. It did not cut all the way through, he had like 3 strands of the core left holding him. Newer rope, experianced climber...... crazy shit does happen.
"....... Be sure to linger......." Mike Tucker
Post Reply