trad rack

Placing a cam? Slotting a nut? Slinging a tree?
User avatar
krampus
Posts: 3933
Joined: Tue Dec 26, 2006 9:31 am

Post by krampus »

ahab wrote:rack in fear
Image

this guy is ready for calipso III
How you compare may not be as important as to whom you are compared
User avatar
ahab
Posts: 1024
Joined: Mon Jul 30, 2007 5:36 pm

Post by ahab »

lol, the more shit you buy, the more shit will end up on your harness that you don't need as you stand at the base of your next grand conquest and 'rack up in fear'.
minimalism is where it's at. it's the wave of the future.

go buy two hexes and two cams, lead roadside attraction and report back immediately for further instructions.
buy the Ticket take the Ride
User avatar
bcombs
Posts: 2048
Joined: Sun Nov 02, 2003 4:20 pm

Post by bcombs »

I "lead" Dicey at Best with two pieces. Only because I had just a single cam wide enough to work. Walked it all the way to the hueco below the anchors. :lol:

I suck at trad.
Andrew
Posts: 3809
Joined: Mon Oct 07, 2002 9:40 pm

Post by Andrew »

Aren't cams used for bolting routes? What is this trad yall are talking about.
Living the dream
dustonian
Posts: 3089
Joined: Mon Jul 27, 2009 2:46 pm

Post by dustonian »

For a RRG rack I recommend a 36V Bosch, 1/2" SS glue-ins, Hilti C100 epoxy, and a couple hooks...
Last edited by dustonian on Thu May 27, 2010 9:45 pm, edited 1 time in total.
jrathfon
Posts: 137
Joined: Sat Sep 05, 2009 2:39 pm

Post by jrathfon »

the lurkist wrote:How many gear sales have there been after guys who go out and buy a nice rack without realizing how scared they are about to make themselves go trad climbing for the first time?
I personally have benefited from a few.
here

scared for a good reason, but illustrates the point.
User avatar
Clevis Hitch
Posts: 1461
Joined: Mon Oct 12, 2009 5:10 pm

Post by Clevis Hitch »

dustonian wrote:I recommend a 36V Bosch, 1/2" SS glue-ins, and Hilti C100 epoxy...
8)
If you give a man a match, he'll be warm for a minute. If you set him on fire, he'll be warm for the rest of his life!
Andrew
Posts: 3809
Joined: Mon Oct 07, 2002 9:40 pm

Post by Andrew »

I am not sure you get my point. The only thing I have used a cam for in the last three years has been to pull myself close to the rock to get a bolt in.
Living the dream
User avatar
bcombs
Posts: 2048
Joined: Sun Nov 02, 2003 4:20 pm

Post by bcombs »

Omega cams are the absolute best for that swinging in wildly and slapping at the wall hoping for a good placement situation. 8) Once its in, drill away.
User avatar
Josephine
Posts: 2216
Joined: Sun Oct 01, 2006 10:38 pm

Post by Josephine »

i think the best advice is to go with someone who has a rack and learn what you like and what you don't.

then wait for a gear sale from someone who's getting out of climbing. they really come along. in one year i had 2 friends get out of climbing and both offered to sell me their rack. so i have a beautiful rack full of nice toys :wink:
"Unthinkably good things can happen, even late in the game." ~ Under the Tuscan Sun
Post Reply