electric cowboy

Gaston? High Step? Drop Knee? Talk in here.
absolutsugarsmurf
Posts: 96
Joined: Thu Jan 06, 2005 1:03 am

electric cowboy

Post by absolutsugarsmurf »

I recently climbed electric cowboy (awesome route) and had a bitch of a time cleaning the route because of the rat's nest of slings that have been added so that quick links will hang from the bolts over the ledge to the face. I would have replaced the slings, but was unprepared for such a crummy anchor on a sport climb.

What are the ethics on replacing the slings with some chain link? I'm willing to foot the bill, hike out there, and replace the slings with chain and quick links. Any concerns from the community? I couldn't think of any off hand but I thought I'd put it out there first.

Also, I've heard there can be issues between using plated steel in combination with stainless. Since I've never replaced any part of an anchor before I wanted to make sure I didn't cause un-intended damage. Is there a standard set-up that is becoming popular in the Red that I could use?
marathonmedic
Posts: 1557
Joined: Fri Feb 20, 2004 3:01 am

Post by marathonmedic »

I don't think there would be any problem from the community if you're replacing mank with something a bit more reliable. I haven't seen the anchor setup, but would it be a better situation for some new anchors in a new place instead of having chains running over the edge? How sharp is that ledge?
Ticking is gym climbing outdoors.
User avatar
michaelarmand
Posts: 527
Joined: Fri Mar 23, 2007 1:08 pm

Post by michaelarmand »

Check all the rules with the NFS land......But I say go for it. And if you are so ambitious there are plenty of sketchy bolts and other anchors that need to be replaced out there....
I've been a gumby longer than you've been climbing.
Steve
Posts: 1745
Joined: Fri Sep 27, 2002 1:34 am

Post by Steve »

If the bolts are good I saw just re-do the rig with new webbing and rap rings. The problem with chains over an edge is that they erode the rock into a deep groove, kinda like if a rope was repeatedly run over an edge. Think back to the chains atop Bedtime For Bonzo. I can't quite remember the top of EC, but would moving the position of the anchor take away from the last exciting moves?
I see they are still lopping off mountains in Eastern Kentucky. Electricity isn't cheap.
absolutsugarsmurf
Posts: 96
Joined: Thu Jan 06, 2005 1:03 am

Post by absolutsugarsmurf »

Replacing the quick links with rap rings on slings/webbing would be an easy and cheap alternative. However, the final moves on EC are always exposed to sun. I’m afraid the webbing would deteriorate due to excess UV exposure. The webbing currently there is looking weathered and feels stiff.

The exiting moves would not drastically be altered if the anchor was moved to the face and were kept short, without chain link, perhaps rap anchors instead of bolts. There should be a reason for where they are located though, John B was the F.A. and his judgment on the situation was likely more sound than mine is. Perhaps someone else can speak more knowledgeably on this matter. Besides, moving the anchors is out of the realm of my capabilities and is something I do not feel comfortable attempting. Maybe someone else does. Let me know if you want to, I’ll pay for the hardware, If it is a lawfull act in the NF (teamsuck?).

Webbing wears grooves in rock too. I really don't see a difference. Is there evidence of webbing being less abrasive than chain?
Steve
Posts: 1745
Joined: Fri Sep 27, 2002 1:34 am

Post by Steve »

absolutsugarsmurf wrote:I really don't see a difference. Is there evidence of webbing being less abrasive than chain?
Chain heavy. Webbing light. Chain hard metal. Webbing soft fabric.

Looks like scientific evidence to me. I just remember the grooves the chain on Bedtime wore into the rock, it left a deeper groove in a shorter time than the webbing did. If people would properly replace the webbing and rings on anchors as needed things would be fine. Wasn't there a study finding that UV doesn't weaken webbing as much as previous thought? Of course bolt anchors and chains with a camo paint job are less visible than day glow yellow webbing. I guess I really don't care, whatever the bolting fairies decide is best sounds fine to me.
pawilkes
Posts: 1570
Joined: Sat Jul 10, 2004 5:45 am

Post by pawilkes »

i've been wanting to get on this route since i've heard such good things about it. I guess i'll remember to bring some webbing up w/ me just in case it needs to be replaced.
Sand inhibits the production of toughtosterone, so get it out and send.
JB
Posts: 1228
Joined: Thu Apr 24, 2003 8:36 pm

Post by JB »

have you really seen webbing leave a groove in the rock? that'd be hard to imagine.
[size=75]i may be weak, but i have bad technique[/size]
RRO
Posts: 1949
Joined: Thu Feb 03, 2005 4:18 am

Post by RRO »

we are planning a 9a/b rebolt weekend soon. if your interested in hanging ropes, carrying gear and even drilling some let me know and we will figure out a team weekend to get out there. 9a/b area will be a pet project this winter instead of bolting new routes.
http://www.redriveroutdoors.com

If you need to contact me , email me. Less Internet, less stress
pawilkes
Posts: 1570
Joined: Sat Jul 10, 2004 5:45 am

Post by pawilkes »

depending on your definition of "winter" i may be game for helping out. im planning on moving down to Lex in Jan/Feb and would be keen to help out, especially if it takes me a while to find a job
Sand inhibits the production of toughtosterone, so get it out and send.
Post Reply