Belay Loop Testing

Access, Rehab Projects, Derbyfests and more...
tomdarch
Posts: 2407
Joined: Wed Dec 04, 2002 9:22 pm

Belay Loop Testing

Post by tomdarch »

In the wake of Todd Skinner's fall/death, Wild Country did some testing on intentionally damaged (cut and abraded) belay loops with some interesting results:

PDF: http://www.wildcountry.co.uk/dnlds/Bela ... 20Lite.pdf
Video: http://www.wildcountry.co.uk/Downloads/ ... pBreaking/

In short, the seriously messed up some belay loops but it took a lot of force to break them. Either Skinner's belay loop was almost totally cut/worn through or something else contributed to the accident.

Also interesting is how much the loops stretch under high loads - yet another dynamic link in the belay system.
Bacon is meat candy.
512OW
Posts: 3040
Joined: Mon Oct 21, 2002 9:43 pm

Post by 512OW »

My bet is what happened to Skinner had to do with his rappel method. Ever rappelled with a grigri? It often starts bouncing, and once it starts, it gets worse and worse. I'd imagine that puts quite a bit of dynamic force on a belay loop...over and over and over.

Black Diamond did similiar tests the week the accident happened, with simiiar findings.
"Sticking feathers up your butt does not make you a chicken."
-Tyler Durden

www.odubmusic.com
dhoyne
Posts: 1240
Joined: Mon Jun 30, 2003 5:47 pm

Post by dhoyne »

Makes me feel better about my gym harness; I think I'll keep using it a few more years.
Sarcasm is a tool the weak use to avoid confrontation. People with any balls just outright lie.

[quote="Meadows"]I try not to put it in my mouth now, but when I do, I hold it with just my lips.[/quote]
Pru

Post by Pru »

so my mouse chewed harness probably has at least a few good years in it? Cool.
Regs
Posts: 2
Joined: Fri Oct 13, 2006 5:35 pm

Post by Regs »

From what I remember about the accident report, Skinner had two slings girth hitched to his belay loop, all the time. This prevented the belay loop from spinning and wearing evenly.
longlegsrule
Posts: 1799
Joined: Sat Jan 25, 2003 7:21 pm

Post by longlegsrule »

If climbers are supposed to always double things back and back things up then why would someone JUST use a belay loop for anything but belaying?

It may scrunch my harness down more and make two points of pressure on my locker but nothing gets attached to me without going through my belay loop and my harness....even when I rap my webbing gets put through my harness and not my belay loop....call me paranoid.

Am I the only one that does this stuff? :shock:
From Kentucky ;o)
pawilkes
Posts: 1570
Joined: Sat Jul 10, 2004 5:45 am

Post by pawilkes »

i really like belay loops, they make things much more comfortable. If you want it to be backed up you can tie a 6 mm cord through both the loops and have it back up your belay loop
Sand inhibits the production of toughtosterone, so get it out and send.
User avatar
michaelarmand
Posts: 527
Joined: Fri Mar 23, 2007 1:08 pm

Post by michaelarmand »

I think backing up the belay loop is overkill. You have to be able to trust your gear. The rope, belay biner, ATC, and belay loop are each life critical, which is why you should replace them when in doubt....
I've been a gumby longer than you've been climbing.
rhunt
Posts: 3202
Joined: Thu May 29, 2003 12:02 pm

Post by rhunt »

never belay through a belay loop that's dangerous! a belay is simply a peice of webbing to hold the two parts of your harness together.
"Climbing is the spice, not the meal." ~ Lurkist
User avatar
pigsteak
Posts: 9684
Joined: Tue Jun 17, 2003 6:49 pm

Post by pigsteak »

rhunt wrote:never belay through a belay loop that's dangerous! a belay is simply a peice of webbing to hold the two parts of your harness together.
what????? the loop is there to belay from.
Positive vibes brah...positive vibes.
Post Reply