K.N.A.R.P
-
- Posts: 1452
- Joined: Mon Apr 12, 2004 7:02 pm
Umm the Army Corps of Engineers were going to dam the Red River and flood the Gorge a few decades ago.. The site of the dam was to be around Jailhouse Rock.squeezindlemmon wrote:Wasn't there something like this years ago proposed for the Long Wall area?
I see they are still lopping off mountains in Eastern Kentucky. Electricity isn't cheap.
Eminent Domain is not something that is easy to do or that government entities like doing. It was recently challenged and upheld in New London, Connecticut, but that was related to economic redevelopment. The government has to prove larger benefits to "take property". Since Rick owns a large section of this area and probably would never sell, that is going to mess up plans slightly. They might be able to work around his corner if the initiative is really there. I am sure the Army Corps of Engineers will be involved and there will be public hearings, probably also the TVA.
"But what is happiness except the simple harmony between a man and the life he leads?" – Lord Byron
http://www.muirvalley.com/map-contour.html
With a water elevation of 1020', it's hard to tell wether the climbs would be submerged. Where the dam is indicated, the valley floor should be around 800' to 850', with a top of dam at 1080', that's a roughly 200' tall dam, which is some serious construction. (Remember that the force that water exerts on the base of a dam is a function of it's depth - at 200' deep that's about 6.5 US tons per sq. ft.) It would be a 'big' dam, but not a 'huge' one. It's interesting that preliminary engineering doesn't indicate things like hydroelectric generation or a water pumping facility.
Also, when you look at the elevations on the contour map, a water level of 1020' results in an oddly underfilled reservoir. It's an interesting coincidence that the dam is located very near to the limits of the Muir Valley property boundary. Siting a dam is a pretty complex process that takes into account everything from geology to construction logistics. It's not like someone just looks at a map in some GIS software, slaps down a line and clicks a few buttons to simulate a reservior.
As for a 'shopping mall' sized paved area (200k sq. ft.?) - that would involve some serious grading (a.k.a. 'expensive') - nothing around there is very flat. You couldn't 'cut' very far down without hitting rock, and trucking 'fill' into an area like that would be crazy expensive. Plus, there are all the issues of stabilizing fill on those hillsides...
None of this is to say that there aren't examples of bad engineering out there...
With a water elevation of 1020', it's hard to tell wether the climbs would be submerged. Where the dam is indicated, the valley floor should be around 800' to 850', with a top of dam at 1080', that's a roughly 200' tall dam, which is some serious construction. (Remember that the force that water exerts on the base of a dam is a function of it's depth - at 200' deep that's about 6.5 US tons per sq. ft.) It would be a 'big' dam, but not a 'huge' one. It's interesting that preliminary engineering doesn't indicate things like hydroelectric generation or a water pumping facility.
Also, when you look at the elevations on the contour map, a water level of 1020' results in an oddly underfilled reservoir. It's an interesting coincidence that the dam is located very near to the limits of the Muir Valley property boundary. Siting a dam is a pretty complex process that takes into account everything from geology to construction logistics. It's not like someone just looks at a map in some GIS software, slaps down a line and clicks a few buttons to simulate a reservior.
As for a 'shopping mall' sized paved area (200k sq. ft.?) - that would involve some serious grading (a.k.a. 'expensive') - nothing around there is very flat. You couldn't 'cut' very far down without hitting rock, and trucking 'fill' into an area like that would be crazy expensive. Plus, there are all the issues of stabilizing fill on those hillsides...
None of this is to say that there aren't examples of bad engineering out there...
Bacon is meat candy.
I received this in an email from the lead engineer of the KNARP dam site proposal:
Yea, I'd say so!The client (K.N.A.R.P.) wants a little more information on the figure. This appears to be a controversial project because of the proposed flooding.
Does he have a strange bear claw like appendage protruding from his neck? He kep petting it.
Jeez. That blows ass. As for eminent domain and such, I know that the Transportation Cabinet can condemn land to build highways across if the homeowner refuses to sell. I am assuming this is a private group though? Hey, look at the bright side though (if there is such a thing), Roadside now becomes Lakeside. (Just kidding)
Mj
Mj
...quitting drinking is kinda like washing your hands after you take a crap...why start now?
Oh, and if it is true and someone is trying to get this moving, We will all be dead and gone (so will our kids) before it actually happens. This stuff takes decades to even break ground on. They are still talking about damming up the KY River (or one of its tributaries) close to my house and make a lake out of the whole area. I think the project was propsed in the 60's or 70's.
Mj
Mj
...quitting drinking is kinda like washing your hands after you take a crap...why start now?
-
- Posts: 2438
- Joined: Mon Oct 07, 2002 6:05 pm
KRAPN?ynot wrote:Any chance KNARP is a cover name for something else?............
"Be responsible for your actions and sensitive to the concerns of other visitors and land managers. ... Your reward is the opportunity to climb in one of the most beautiful areas in this part of the country." John H. Bronaugh